Rockin' Jewelry > Tutorials for Jewelry Making
how to bezel set cabochon that has sharp corners
krautgirl65:
have an emerald cut rose quartz that needs a good home...small 5mmx3mm stone so corners must be crisp and I suck at this!...please...any suggestions are welcomed!
Phishisgroovin:
whenever i set a stone with sharp corners, i trim the bezel on those edges.
There are a few videos on youtube to show how.
basically, i use a worn 600 disk i made with a worn out expanding drum sanding belt.
IE: using a soda pop lid off a plastic bottle of Coke, cutting around it to make a disk, then popping a poin through the center and putting it on a dremmel tool to grind away the excess metal on the sharp corner of the setting.
Granted, it will take practice getting a rounded beautiful corner, practice practice practice.
Phishisgroovin:
and ALWAYS ALWAYS ALWAYS SET CORNERS FIRST!
Then go onto the straights.
Phishisgroovin:
https://www.youtube.com/watch?v=l4L9AQ585aw
Orrum:
X2 Phish!
Navigation
[0] Message Index
[#] Next page
Go to full version