Lapidaryforum.net
Gadgets, Gizmos, and Dohickeys => Cutting, Grinding, Polishing => Topic started by: wednesdaytgw on July 10, 2016, 06:32:38 PM
-
some years ago at a mineral, gem, lapidary bead show I purchased a lot of very small bead reaming bits, diamond coated...
they were an inch and under in length, and very narrow... just perfect for my jewelry making
I've pretty much worn them down...
and, I misplaced my note of the source
online shopping brings up only larger bits and most with devices.. I need only the tips
anyone know of a source for these?
thanks!
-
Probably Daniel Lopacki, he carries teeny little diamond bits. Just went to his site and saw that he's closing it down, so I encourage all of you how might need these to buy soon. http://lopacki.com/lopacki/drills/index.html (http://lopacki.com/lopacki/drills/index.html) The website store is closed down, so if you need anything you have to call. http://lopacki.com/lopacki/index.html (http://lopacki.com/lopacki/index.html)
Debbie K
-
Check out jadecarver.com as well
Sent from my LGLS990 using Tapatalk
-
Probably Daniel Lopacki, he carries teeny little diamond bits. Just went to his site and saw that he's closing it down, so I encourage all of you how might need these to buy soon. http://lopacki.com/lopacki/drills/index.html (http://lopacki.com/lopacki/drills/index.html) The website store is closed down, so if you need anything you have to call. http://lopacki.com/lopacki/index.html (http://lopacki.com/lopacki/index.html)
Debbie K
sent them a email, thank you....
their site solved a problem....his pic of a "clothespin" small piece holder... perfect! I thought I had to make something from scratch....
have drilled my finger twice now with tiny tanzanite beads... the jewelry supplier holders would take more time to position beads than I have left..
-
Forny maskes a tip cleaner that works well for me, I don't use it often, but mostly when an obstruction has clogged the bead hole, or to ream and smooth out the unequal transition of the meeting place of holes bored in different directions. Not made for beads, but a slick tool when needed. Amazon link for mor info on this tool https://www.amazon.com/Forney-86119-Tip-Cleaner-Long/dp/B000BQT6P8
-
Forny maskes a tip cleaner that works well for me, I don't use it often, but mostly when an obstruction has clogged the bead hole, or to ream and smooth out the unequal transition of the meeting place of holes bored in different directions. Not made for beads, but a slick tool when needed. Amazon link for mor info on this tool https://www.amazon.com/Forney-86119-Tip-Cleaner-Long/dp/B000BQT6P8
that is interesting.. thank you
what is it generally used for?
-
for cleaning gas nozzles etc.