Lapidaryforum.net
Let's Rock => Identifications of Materials => Topic started by: Phishisgroovin on November 18, 2016, 12:07:41 PM
-
And why does it have $45 price on it?
This is really Wirth this much?
It has the price on both sides, was glued to a 2x4 for cutting
(http://uploads.tapatalk-cdn.com/20161118/3ee78075003ba12b0c629225b5b95496.jpg)
(http://uploads.tapatalk-cdn.com/20161118/28dad0aeb8d6f48449b81ee3dd17c796.jpg)
(http://uploads.tapatalk-cdn.com/20161118/939112848c434fd8d00e5ed183bc1989.jpg)
Sent from my SM-G928T using Tapatalk
-
Looks like Biggs PJ from Oregon. It's always a little pricey. Not sure that piece is a $45 piece. The other jasper with similar pattern is Deschutes, which I think is more rare and pricier. There is also a "China Grove" jasper from the Biggs area that has areas with similar pattern but is less even in hardness and sometimes will not take a glassy finish. It is less pricey. They all make beautiful cabs...
Craig
-
My vote is Biggs, what are the dimensions? One cab of Biggs can easily fetch $45.00. :icon_bounce:
-
Biggs jasper cab. ( see above post )
-
I vote Biggs, too! :WEEEE:
-
it also, from what i think hematite looks like rough has a little bit of it in there too.
-
I will measure in a bit, i had to take the grossular off the saw for a bit.
have to cut in daylight and also change the rocks orientation so it cuts better, its getting to the edge and pushing my blade to the left (as i face it), or away from the main rock at the very last couple inches of cut.
Tossed a chunk of Teanaway in the chuck and lit it up.
-
Its three inches by four + inches and at an inch plus thick
Sent from my SM-G928T using Tapatalk
-
I'm going to put my vote in for Biggs, too. Could also be Fulton Canyon (same area), but I don't think China Hollow.