Lapidaryforum.net
Rock Art => Cabochons, Intarsias, Cameos => Topic started by: Isadora on February 17, 2019, 09:38:05 PM
-
I am somewhat new to cabochon cutting. In doing a lot of research on the topic, somewhere I read about being able to fill a small pit in a rock face that did not have crystals in it, with "something". The article suggested a clear insert that could be cut with the stone, and now that I need that advice as to what I could fill a small pit with before shaping a cab, I cannot find the article. Has anyone heard of this, or have a suggestion of a possibility to use ?
-
As it happens, I am dealing with that question myself. I need further confirmation and elaboration on the topic, but it seems that for some instances, a cyanoacrylate glue (?Superglue?) may be the answer. Watch my message thread for further information (last page).
http://lapidaryforum.net/group/index.php?topic=4795.15
Also there are some threads discussing stabilizing rocks for cutting that may be of interest. http://lapidaryforum.net/group/index.php?topic=2460.0
-
A lot of people use superglue. Filling the pit first with some baking soda or even old dried mud from the cabbing machine trays first can also help by adding strength. Look for something that closely matches colors in the stone. Or maybe even use powdered quartz sand as the filler then the superglue as the binder.
-
Going to try all. Thank you, thank you !
-
A lot of commercial lapidary shops use large amounts of super glue. You need to get the gap filling type if it is to span any space. Normally you use a spray to accelerate the hardening but you can just wait a few days.
-
One word - Hxtal.