Lapidaryforum.net

Rock Art => Cabochons, Intarsias, Cameos => Topic started by: vitzitziltecpatl on March 07, 2019, 07:26:05 PM

Title: Hubbard Basin Wood Scrap
Post by: vitzitziltecpatl on March 07, 2019, 07:26:05 PM
It's been a long time since I posted a cab, so I thought this would be a good one. Had a really wedge shaped piece of rough - this is the "heel", and what I salvaged from it.

Last shot is just to show the shine this stuff takes at 3000 grit.

 
Title: Re: Hubbard Basin Wood Scrap
Post by: Ryaly2dogs on March 08, 2019, 05:28:32 PM
Beautiful finish! :icon_salut:
Title: Re: Hubbard Basin Wood Scrap
Post by: vitzitziltecpatl on March 08, 2019, 05:45:15 PM
Thanks. This stuff will actually get a lot better when I run it up to final polish. Anything that shines like this at 3000 grit is a treat to work with.
Title: Re: Hubbard Basin Wood Scrap
Post by: VegasJames on March 10, 2019, 10:11:50 PM
Beautiful cab.
Title: Re: Hubbard Basin Wood Scrap
Post by: gjones on July 03, 2019, 03:10:29 PM
Great cab, a super shine. What was your final grit and or polish material!
Title: Re: Hubbard Basin Wood Scrap
Post by: vitzitziltecpatl on July 14, 2019, 07:47:18 AM
Sorry for the slow reply - been getting ready for our club's annual "big show".

The cab was done on the Genie, and the last wheel used before the photo was the 3000 Nova.
Title: Re: Hubbard Basin Wood Scrap
Post by: Sapphireminer on July 15, 2019, 02:39:57 AM
Great cab Vince its going to look super when you get to the final polish .Dave