Lapidaryforum.net

Rock Art => Cabochons, Intarsias, Cameos => Topic started by: Stonemon on July 24, 2019, 04:21:27 PM

Title: Deer sky display slab
Post by: Stonemon on July 24, 2019, 04:21:27 PM
Worked up a piece of 55fossil's Deer Sky jasper at the request of one of my etsy customers. I had done another very similar that sold while he was deciding whether or not to buy it so I cut another for him.
4 x 3 1/4 x 3/16 inches.
Polished both sides.
Robin, Please move this if it is not in the right place.
Title: Re: Deer sky display slab
Post by: VegasJames on July 24, 2019, 06:11:02 PM
Very nice. :headbang:
Title: Re: Deer sky display slab
Post by: vitzitziltecpatl on July 24, 2019, 08:24:11 PM
Nice work, indeed. The meets at the corner are a nice touch.

Looks like the mothership is coming in for a landing... .
Title: Re: Deer sky display slab
Post by: Windenzee on July 24, 2019, 11:25:01 PM
Lovely piece. I especially like the way you have also shown the edge with the camber.
Thank you.
Karen
Title: Re: Deer sky display slab
Post by: hummingbirdstones on July 25, 2019, 06:54:55 AM
Wow, that's a beautiful piece.  The beveled edges really finish it off nicely!
Title: Re: Deer sky display slab
Post by: ileney on September 20, 2019, 02:36:19 PM
Very nice!
Title: Re: Deer sky display slab
Post by: Stonemon on September 20, 2019, 05:31:52 PM
Thanks to all of you! I will probably do another one soon.. There were a bunch that came out of that piece of rough and I try to throw one out to the market now and again...
Title: Re: Deer sky display slab
Post by: Sapphireminer on September 23, 2019, 05:20:05 AM
That's is one beautiful piece of stone and a serperb piece of workmanship . Dave
Title: Re: Deer sky display slab
Post by: Mossagatemac on January 06, 2020, 03:44:27 PM
Stonemon - looking really good.  What tools/process did you use to do this? 
Title: Re: Deer sky display slab
Post by: Stonemon on January 06, 2020, 05:07:00 PM
Stonemon - looking really good.  What tools/process did you use to do this? 

Slabbed out on my 24" Frantom, the 3 straight edges were trimmed as close to straight as I could get them then trued on a wet 8" diamond lap disc. Bevels cut freehand then straightened on the lap. The top curve was free-handed along with the bevels.All edges and bevels sanded and finished to 50,000 on my Cab King 8V1. Faces were sanded with high speed dry disks ala Richardson Ranch type sander up to 1000 grit, then polished on a dry canvas buff with 50,000 diamond paste.