Lapidaryforum.net

Gadgets, Gizmos, and Dohickeys => Fixing, Modifying and Refurbishing your Lapidary Equipment => Topic started by: mmk8283 on September 12, 2019, 07:25:27 AM

Title: Just purchased 24" frantom. it has an air connection?
Post by: mmk8283 on September 12, 2019, 07:25:27 AM
Purchased an old 24" Frantom saw... has a square white hood compared to most pictures I've seen online. I have a question about an air fitting that is on the back of the saw, inside the cabinet it splits off into two copper lines that blow air on each side of the blade, they face towards the front of the machine. Does anyone have any clue what this is for?
Title: Re: Just purchased 24" frantom. it has an air connection?
Post by: lithicbeads on September 12, 2019, 08:11:18 AM
I knew a guy who has dozens of saws and all are retrofitted to  evacuate the oil mist after the saw shuts down , they could be for that purpose.
Title: Re: Just purchased 24" frantom. it has an air connection?
Post by: Slabbercabber on September 12, 2019, 10:23:09 AM
Are you sure they are meant for air?  I do that same thing to carry oil from a cascade filter system to the blade.  In that case the nozzles would be pointed inward toward the blade.
Title: Re: Just purchased 24" frantom. it has an air connection?
Post by: catmandewe on September 13, 2019, 08:08:47 PM
Those are meant to pump oil right onto the blade to aid in cooling.

Tony