Lapidaryforum.net

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome new members & old from the Lapidary/Gemstone Community Forum. Please join up. You will be approved after spam check & you must manually activate your acct with the link in your email

Congratulations to Stonemon and his Blue Biggs Jasper Cab!

 www.lapidaryforum.net

Another cabochon contest coming soon!

Pages: [1]   Go Down

Author Topic: Anyone familiar with polishing petrified wood?  (Read 157 times)

0 Members and 1 Guest are viewing this topic.

Quitclayton

  • Newbie
  • *
  • Offline Offline
  • Posts: 20
  • I spelled my own name wrong..bugger.
Anyone familiar with polishing petrified wood?
« on: October 12, 2018, 07:28:56 PM »

I recently got a piece of petrified wood and sliced off a slab for cabs, but noticed right away that depending on the ''grain'' it had extremely different properties when polished.

Does anyone here have any experience or suggestions for polishing up this stuff before I do more cabs?
Logged


Stonemon

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 335
Re: Anyone familiar with polishing petrified wood?
« Reply #1 on: October 12, 2018, 07:53:52 PM »

It varies greatly depending on the quality of the material you are working with. "petrified wood" as a material covers a wide range of stones which may or may not be completely silicified. Variants also include opalized wood and carbonized wood, etc.
A picture of the material that you are trying to polish would be helpful. Dull spots and undercutting are common in some types. If the material you are working with has a wide range of hardness in a small area, it can be very difficult to create an even finish...
 
Logged


Bill

bilquest

  • Newbie
  • *
  • Offline Offline
  • Posts: 48
    • Rocks and Stuff
Re: Anyone familiar with polishing petrified wood?
« Reply #2 on: October 13, 2018, 12:58:30 PM »

I've cut a lot of Arizona rainbow PW. The most vexing problem I face with PW is fracturing. It is very hard yet brittle. Sometimes you don't see a fracture until final polish, and that can be frustrating. You also get variations with the grain. As you mentioned, sometimes it polishes, sometimes not. I'm not sure there's a definite answer to your question. Like a lot of stone, the variation in cabbing quality is a wide spectrum. At risk of taking heat from the cabbing purists here, if I'm doing a bunch of cabs, I'll vibe tumble the finish which does a pretty good job. Otherwise, standard sanding and final polish with cerium has worked well for me. Regardless of the challenge, I love to cut PW... the colors and variations are just too interesting to ignore. Good luck!
Logged

vitzitziltecpatl

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 589
Re: Anyone familiar with polishing petrified wood?
« Reply #3 on: October 15, 2018, 07:49:15 AM »

No heat from here for the vibe tumbler polish. The only commercial cutter where we live does that exclusively.

55fossil

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 578
Re: Anyone familiar with polishing petrified wood?
« Reply #4 on: October 15, 2018, 01:12:10 PM »

   I am not a purist per say....    I like to hand cut and polish my cabs. I have over 100 cabochons on the bench and in stages right now. My major market is to consumers who want cabochons that I hand mine and hand finish as well as those pieces I out in jewelry I make. Yep, it is a small and special market that I fit in with and appreciate. My prices on these special pieces reflect the value of Hand Made cabochons...

   But, I do use a vibratory tumbler at times. When I am doing cabs for the under $40 price range they may go into the vibe after the 280 grit wheel. I put them in 600 grit polish for 3 days. Then it is back to the Diamond Genie. This middle stage removes a lot of little pesky marks that I see on way to many cabochons that are just done quickly. These are the marks you see when you look at a cabochon with optics and roll it under a strong light. Also those tiny little flat marks you may see on many stones of mid quality.

feel free to visit my website or flickr page for examples...   blueowyheegems@aol.com   or  https://www.flickr.com/photos/blueowyheegems/sets/

PS:    I have found that vibratory tumblers are not kind to stones that under cut or have mixed hardness
Logged
Pages: [1]   Go Up
 

Page created in 0.077 seconds with 33 queries.